Totolink Router Login

Totolink is a networking brand under the Zioncom Holdings group, primarily targeting Southeast Asia, South Asia, and Eastern Europe. Their routers are a common sight in Vietnam, Indonesia, Bangladesh, and Pakistan — markets where budget WiFi hardware sells in high volumes. The admin panel is at 192.168.1.1 or the local hostname totolink.net, with admin / admin as default credentials.

Totolink's product line runs from basic N-series (WiFi 4) routers through AC-series (WiFi 5) and newer AX-series (WiFi 6) models. The interface is simple and familiar if you've used any budget Asian router brand.

Totolink Admin: 192.168.1.1
Also: totolink.net  |  Username: admin  |  Password: admin

Default Credentials

SeriesAdmin IPUsernamePassword
N-series (WiFi 4, N300/N600)192.168.1.1adminadmin
A-series (WiFi 5, A3000/A7000)192.168.1.1adminadmin
X-series (WiFi 6, X5000/X6000)192.168.1.1adminadmin or set during setup
LR-series (range extenders)192.168.1.1adminadmin

How to Log In

  1. Connect to the Totolink WiFi or via ethernet
  2. Open a browser and go to http://192.168.1.1 or http://totolink.net
  3. Username: admin   Password: admin
  4. The Totolink interface has Basic and Advanced sections — Basic covers WiFi name/password, Advanced covers port forwarding, parental controls, QoS

Change WiFi Password

  1. Log in at 192.168.1.1
  2. Go to Wireless → Wireless Basic Settings (2.4 GHz or 5 GHz)
  3. Update the WiFi Password or WPA Pre-Shared Key
  4. Click Apply and reconnect devices with the new password

Security Note

Like all routers using admin/admin defaults, change the admin panel password after first login. Go to System Tools → Change Password and set a unique password. The default leaves your router settings accessible to anyone on your network.

Troubleshooting

ProblemFix
totolink.net not loadingOnly works when connected to Totolink network — try 192.168.1.1 directly
admin/admin rejectedPassword was changed — factory reset: hold reset button 10 seconds
Extender not connectingUse WPS: press WPS on main router, then WPS on extender within 2 minutes
Speed much slower than planN-series are 100 Mbps WAN max — check your model's WAN port speed if you have faster internet

Factory Reset

Hold the reset button (usually on the back, pinhole) for 10 seconds with the router powered on. The LED blinks and the router reboots to admin/admin defaults.