Technicolor Router Login

Technicolor (formerly Thomson) is a French company that manufactures residential gateways deployed by ISPs — the brand is invisible to most users because ISPs rebrand the hardware. You'll find Technicolor modems and gateways deployed by Comcast/Xfinity, AT&T, Charter/Spectrum, and many European and Australian carriers. If you see model numbers like TC7200, TC8715, or DGA4132, that's Technicolor hardware.

The typical admin IP is 192.168.0.1 and default credentials are admin / admin on consumer-branded units. ISP-deployed units often have the password on the device label instead. The web interface is straightforward — basic WiFi, LAN, and security settings.

Technicolor Admin: 192.168.0.1
Some models: 192.168.1.1  |  Username: admin  |  Password: admin or on device label

Common Models and Deployments

ModelISP / UseAdmin IPType
TC7200Charter / Spectrum, others192.168.0.1DOCSIS 3.0 cable modem + router
TC8715Charter / Spectrum192.168.0.1DOCSIS 3.0 modem + router (AC1750)
DGA4132 / DGA4231European ISPs192.168.1.1ADSL/VDSL gateway
CGM4140COM (Xfinity)Comcast xFi10.0.0.1ISP-custom firmware — see Xfinity guide
TG789 / TG800 seriesTelstra (Australia), others192.168.1.1VDSL / fiber gateway
Xfinity Technicolor units: Models deployed by Comcast (like the CGM4140COM) run Comcast's xFi firmware, which changes the admin IP to 10.0.0.1. These follow Xfinity's login process, not standard Technicolor defaults. See the Xfinity guide.

How to Log In

  1. Connect to the Technicolor WiFi or via ethernet
  2. Open a browser and go to http://192.168.0.1 (or 192.168.1.1 for European models)
  3. Username: admin   Password: admin (or label password for newer/ISP units)
  4. The Technicolor interface has tabs for Home, Broadband, Local Network, Wireless, and Toolbox

Change WiFi Password

  1. Log in at 192.168.0.1
  2. Click the Wireless tab
  3. Select your WiFi network (2.4 GHz or 5 GHz)
  4. Update the WPA Pre-Shared Key or Password field
  5. Click Apply

Troubleshooting

ProblemFix
192.168.0.1 not loading on Comcast unitComcast Technicolor uses 10.0.0.1 — see the Xfinity guide
admin/admin rejectedISP-deployed unit — check the label for a unique password
Port forwarding greyed outISP may lock port forwarding on their deployed units — contact ISP
Forgot passwordFactory reset: press and hold reset button 10–15 seconds

Factory Reset

Locate the reset button (usually a pinhole on the back) and hold for 10–15 seconds while the unit is powered on. The device reboots to factory defaults. For ISP-deployed units, factory reset removes ISP configuration — the gateway may need to be re-provisioned by your ISP before internet service works again.